Mazda CX-7 Navigation System Скачать руководство пользователя страница 437 | Manualshive

Страница: 437 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 437

Black plate (437,1)

Front side marker lights

1. Make sure the headlight switch is off.

2. If you are changing a bulb in the right

headlight unit, start the engine, turn the
steering wheel all the way to the right,
and turn off the engine. If you are
changing a bulb in the left headlight
unit, turn the steering wheel to the left.

3. Turn the screws and the center section

of the plastic retainers
counterclockwise and remove them,
then partially peel back the mudguard.

Installation

Removal

4. Turn the socket and bulb assembly

counterclockwise and remove it.

5. Disconnect the bulb from the socket.

6. Install the new bulb in the reverse order

of the removal procedure.

NOTE

To replace the bulb, contact an Authorized
Mazda Dealer.

Front turn signal lights/Parking lights

1. Make sure the ignition is switched off

and the headlight switch is off.

2. Loosen the screws securing the unit.

3. Remove the unit by pulling it outward

using both hands.

4. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector downward.

5. Turn the socket and bulb assembly

counterclockwise and remove it.

Maintenance and Care

Owner Maintenance

8-45

CX-7_8CG3-EA-11J_Edition1 Page437
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

«
...
435
436
437
438
439
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов