Mazda CX-7 Navigation System Скачать руководство пользователя страница 357 | Manualshive

Страница: 357 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 357

Black plate (357,1)

q

Rear View Monitor

í

The rear view monitor is a visual assist system when reversing the vehicle that provides
images from the rear of the vehicle.

WARNING

The rear view monitor is only a visual assist device when reversing the vehicle. The
images on the screen may be different from the actual conditions. Always drive
carefully confirming the safety of the rear and the surrounding conditions by looking
directly with your eyes. Reversing the vehicle by only looking at the screen may cause
an accident or a collision with an object.

CAUTION

Ø

When the display is cold, images may course across the monitor or the screen and
may be dimmer than usual, which could cause difficulty in confirming the
surrounding conditions of the vehicle. Always drive carefully confirming the safety
of the rear and the surrounding conditions by looking directly with your eyes.

Ø

Do not apply excessive force to the camera. The camera position and angle may
deviate.

Ø

Do not disassemble, modify, or remove it as it may no longer be waterproof.

Ø

The camera cover is made of plastic. Do not apply degreasing agents, organic
solvents, wax, or glass coating agents to the camera cover. If any are spilled on
the cover, wipe off with a soft cloth immediately.

Ø

Do not rub the cover excessively, or polish it using an abrasive compound or a
hard brush. The cover may be damaged affecting the image.

NOTE

l

If water, snow, or mud is stuck on the camera lens, wipe it off using a soft cloth. If it cannot be
wiped off, use a mild detergent.

l

If the camera temperature changes rapidly, such as by pouring hot water on it under cold
temperature conditions, the rear view monitor may not operate correctly.

Interior Comfort

Interior Equipment

6-119

í

Some models.

CX-7_8CG3-EA-11J_Edition1 Page357
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

«
...
355
356
357
358
359
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов