Mazda CX-7 Navigation System Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 32

Black plate (32,1)

q

Unfastening the Seat Belt

Depress the button on the seat belt buckle.
If the belt does not fully retract, pull it out
and check for kinks or twists. Then make
sure it remains untwisted as it retracts.

Button

NOTE

l

When using the center-rear seat belt, refer
to

“

Center-Rear Position Seat Belt

”

(page

2-23).

l

If a belt does not fully retract, inspect it for
kinks and twists. If it is still not retracting
properly, have it inspected at an Authorized
Mazda Dealer.

q

Front Shoulder Belt Adjuster

Adjust the height of the shoulder belt if
the seat belt touches your neck, or if it
crosses your arm instead of your shoulder.
To raise the shoulder belt adjuster, push
the adjuster up. To lower the shoulder belt
adjuster, pull the adjuster and slide it
down. Make sure the adjuster is locked.

To raise

To lower

WARNING

Positioning the Shoulder Portion of the
Seat Belt:

Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.

2-20

Essential Safety Equipment

Seat Belt Systems

CX-7_8CG3-EA-11J_Edition1 Page32
Saturday, September 24 2011 10:31 AM

Form No.8CG3-EA-11J

«
...
30
31
32
33
34
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов