Mazda CX-7 Navigation System Скачать руководство пользователя страница 418 | Manualshive

Страница: 418 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 418

Black plate (418,1)

Power Steering Fluid

q

Inspecting Power Steering Fluid
Level

CAUTION

To avoid damage to the power
steering pump, don't operate the
vehicle for long periods when the
power steering fluid level is low.

NOTE

Use specified power steering fluid (page 10-4).

Inspect the fluid level in the reservoir at
each engine oil change with the engine off
and cold. Add fluid if necessary; it does
not require periodic changing.

The level must be kept between MAX and
MIN.

Visually examine the lines and hoses for
leaks and damage.

If new fluid is required frequently, consult
an Authorized Mazda Dealer.

Automatic Transaxle Fluid
(ATF)

q

Inspecting Automatic Transaxle
Fluid Level

The automatic transaxle fluid level should
be inspected regularly. Measure it as
described below.

5-speed transaxle

CAUTION

Ø

Always check the automatic
transaxle fluid level according to
the following procedure. If the
procedure is not done correctly,
the automatic transaxle fluid level
cannot be measured accurately
which could lead to automatic
transaxle damage.

Ø

A low fluid level can cause
transaxle slippage. Overfilling can
cause foaming, loss of fluid, and
transaxle malfunction.

Ø

It is recommended to use Mazda
Genuine automatic transaxle fluid
(page 10-4).

1. Park on a level surface and set the

parking brake firmly.

2. Make sure there is no ATF leakage

from the ATF hose or the housing.

3. Shift the shift lever to the park position

(P), start the engine and warm it up.

CAUTION

Do not shift the shift lever while the
engine is warming up. If the ATF level
is extremely low, the automatic
transaxle could be damaged.

8-26

Maintenance and Care

Owner Maintenance

CX-7_8CG3-EA-11J_Edition1 Page418
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

«
...
416
417
418
419
420
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов