Mazda CX-7 Navigation System Скачать руководство пользователя страница 421 | Manualshive

Страница: 421 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 421

Black plate (421,1)

Washer Fluid

q

Inspecting Washer Fluid Level

WARNING

Use only windshield washer fluid or
plain water in the reservoir:

Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the
windshield, affect your visibility, and
could result in an accident.

Using Washer Fluid Without Anti-freeze
Protection in Cold Weather:

Operating your vehicle in
temperatures below 4 degrees C (40
degrees F) using washer fluid without
anti-freeze protection is dangerous
as it could cause impaired windshield
vision and result in an accident. In
cold weather, always use washer
fluid with anti-freeze protection.

NOTE

State or local regulations may restrict the use
of volatile organic compounds (VOCs), which
are commonly used as anti-freeze agents in
washer fluid. A washer fluid with limited VOC
content should be used only if it provides
adequate freeze resistance for all regions and
climates in which the vehicle will be operated.

Inspect fluid level in the washer fluid
reservoir; add fluid if necessary.

Use plain water if washer fluid is
unavailable.
But use only washer fluid in cold weather
to prevent it from freezing.

NOTE

Front and rear washer fluid is supplied from
the same reservoir.

Maintenance and Care

Owner Maintenance

8-29

CX-7_8CG3-EA-11J_Edition1 Page421
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

«
...
419
420
421
422
423
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов