Mazda CX-7 Navigation System Скачать руководство пользователя страница 298 | Manualshive

Страница: 298 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 298

Black plate (298,1)

Safety Certification

This CD player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety performance standards of the U.S. Department of
Health and Human Services.

CAUTION

Ø

This CD player should not be adjusted or repaired by anyone except qualified
service personnel.
If servicing is required, contact an Authorized Mazda Dealer.

Ø

Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser exposure. Never operate the CD
player with the top case of the unit removed.

Ø

Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

NOTE

For CD player section:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.

6-60

Interior Comfort

Audio System

CX-7_8CG3-EA-11J_Edition1 Page298
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

«
...
296
297
298
299
300
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов