Maytag MLE20PDAYW0, Руководство по обслуживанию

Страница: 78 / 204

4-22
Open the washer door.
Remove two 1/4” hex head screws that
secure the hinge to the front panel.
Lift the door and hinge assembly up and pull
the hooks out of the slots in the front panel.
This model stacked washer/dryer has door
hinges which allow the doors to open a full
180 degrees. This hinge required the door
trim parts be modified. Therefore, the 180
degree hinge is not backwards compatible
with the previous model door hinges. The
washer door has a slanted inner glass bowl
which helps move clothes to the back of the
washer during the wash tumble sequence.
1.
2.
3.
n
reMOve DOOr anD HinGe
aSSeMBly
Two 1/4”
Hex Head
Screws
reMOve DOOr HOOk
Open the washer door.
Remove two T-20 screws that secure the
hook to the door.
Press the locking tab and rotate the hook up
and out of the slots in the door.
reaSSeMBly nOTe: When reinstalling
the door hook, do not tighten the hook
completely. The hook should remain loose
enough to move, as it needs to center
itself when the door closes. The screws
have shoulders to help keep the hook from
becoming too tight. Make sure these screws
are used when reinstalling or replacing the
door hook.
1.
2.
3.
Locking Tab
Two T-20
Screws
Locking Tab