Maytag MLE20PDAYW0, Руководство по обслуживанию

Страница: 104 / 204

4-48
Remove three 1/2” bolts that secure the
lower front weight to the outer tub, and
remove the weight.
Remove three 1/2” bolts that secure the
upper front weight to the outer tub, and
remove the weight.
nOTe: When reinstalling the bolts for the
weights make sure they are secured to
between 14 and 16 foot pounds of torque.
Lift the tub assembly to disengage the
suspension springs from the side panels.
Springs, and clips that the springs hang in
on the side panels, are replaceable parts.
15.
16.
17.
18.
Lift tub straight up to separate the air gap
dampers and move it forward out of cabinet.
nOTe: To avoid damage to components in
the cabinet base or on the outer tub, do not
let the tub drop free inside the cabinet.
If replacing the tub, remove the flat nuts
that secure the weights to the tub by prying
them out of their slots with a flat blade
screwdriver. Flat nuts may not be supplied
with a replacement tub.
nOTe: To install the flat nuts, insert a nut
into each slot and push them into place.
Mark the tub where the clamp is attached
with the pressure hose tied to it.
19.
20.
21.
Front Weight
1/2” Bolts
Tub Spring:
One On Each Side
Must Be Mounted
In Front Most
Opening Of
Side Panel