Maytag MLE20PDAYW0, Руководство по обслуживанию

Страница: 131 / 204

4-75
nOTe: The centrifugal switch is the brown
disc that actuates the lever of the motor
switch when the motor is at rest.
At optimum motor speed, the disc moves
away from the switch lever. When the disc
is pressed in toward the windings, the
actuator arm of the centrifugal switch will be
relaxed. This allows the contacts to close,
completing the heater circuit.
The centrifugal switch is pulled away from
the motor by springs when the motor
speed slows down. If the centrifugal switch
becomes stuck, manually move the switch
in and out to re-align the bars and springs,
to allow free movement of the switch.
To remove the speed increaser, remove the
belt from the speed increaser.
Remove the two 5/16” hex head screws that
secure the speed increaser to the front of
the motor.
TeCH TiP: If the motor pulley and the
speed increaser pulley do not line up
properly, the small belt may ride off the
pulley and may become damaged and need
replacing. To align the pulleys remove the
speed increaser and place thin washers
between the speed increaser housing and
the motor frame to act as shims in aligning
the pulleys as needed.
7.
8.
Two 5/16”
Hex Head
Screws
Belt
Motor Switch
Lever
Centrifugal
Switch
Motor Switch
Motor Switch
Lever
Centrifugal
Switch
Motor Switch