MARUTI SUZUKI 800, Руководство по обслуживанию

Страница: 29 / 644

Exhaust System Inspection
WARNING:
To avoid danger of being burned, do not touch exhaust
system when it is still hot.
Any service on exhaust system should be performed
when it is cool.
When carrying out periodic maintenance or vehicle is raised for
other service, check exhaust system as follows:
Check rubber mountings for damage and deterioration.
Check exhaust system for leakage, loose connections, dents
and damages.
If bolts or nuts are loose, tighten them to specification.
Refer to Section 6K for torque specification of bolts and nuts.
Check nearby body areas for damaged, missing or misposi-
tioned parts, open seams, holes, loose connections or other de-
fects which could permit exhaust fumes to seep into vehicle.
Make sure that exhaust system components have enough clear-
ance from underbody to avoid overheating and possible dam-
age to floor carpet.
Any defects should be fixed at once.
IGNITION SYSTEM
Spark Plugs Replacement
Replace spark plugs with new ones referring to Section 6F.
Distributor Cap and Rotor Inspection
Check distributor cap and rubber caps for cracks.
Clean dusty and stained parts using a dry, soft cloth.
Check center electrode and terminals for wear.
Check rotor for cracks and its electrode for wear.
Repair or replace any component which is found to be in malcondi-
tion.
0B-10 MAINTENANCE AND LUBRICATION