MARUTI SUZUKI 800, Руководство по обслуживанию

Страница: 166 / 644

GENERAL DESCRIPTION
Rear suspension consists of coil springs, rear axle, shock absorbers, lateral rod and trailing arms.
The lateral rod is installed to the body and axle by using bushes so as to prevent axle movement in the lateral
direction.
The trailing arms which are connected with the axle are installed to the body by using a bush so that axle moves
up and down with the bush as its supporting point.
The shock absorber is installed between the body and axle to absorb up-and-down movement of the vehicle body.
1. Rear coil spring
2. Rear bump stopper
3. Rear spring upper seat
4. Rear shock absorber
5. Lateral rod
6. Trailing arm
7. Rear axle
8. Wheel bearing
9. Brake drum 10. Spindle cap
11. Spindle nut
12. Shock absorber lower bolt:
Install bolt from the center of
the vehicle toward the outside.
13. Lateral rod bolt:
Install bolt from the front side
of the vehicle toward the rear
side.
: Tightening Torque
14. Trailing arm front bolt:
Install bolt from the center of the ve-
hicle toward the outside.
15. Shock absorber upper bolt:
Install bolt from the outside of the ve-
hicle toward the inside.
16. Trailing arm rear bolt:
Install bolt from the center of the ve-
hicle toward the outside.
17. Shock absorber upper nut
18. Lateral rod body side nut
19. Lateral rod axle side nut
3E1-2 REAR SUSPENSION