MARUTI SUZUKI 800, Руководство по обслуживанию

Страница: 26 / 644

Engine Oil and Filter Change
Use engine oil of SE, SF, SG, SH or SJ grade.
Select the appropriate oil viscosity according to the left chart.
WARNING:
New and used engine oil can be hazardous.
Be sure to read “WARNING” in General Precaution in Section
0A and observe what in written there.
Proper Engine Oil Viscosity Chart
Before draining engine oil, check engine for oil leakage. If any evi-
dence of leakage is found, make sure to correct defective part be-
fore proceeding to the following work.
1) Drain engine oil by removing drain plug (1).
2) After draining oil, wipe drain plug clean. Reinstall drain plug,
and tighten it securely as specified below.
Tightening Torque
(a): 50 N·m (5.0 kg-m, 36.0 lb-ft)
1, (a)
3) Loosen oil filter (1) by using oil filter wrench (Special tool).
Special Tool
(A): 09915-47310
4) Apply engine oil to new oil filter “O” ring.
5) Screw new filter on oil filter stand by hand until filter “O” ring con-
tacts mounting surface.
CAUTION:
To tighten oil filter properly, it is important to accurate-
ly identify the position at which filter “O” ring first con-
tacts mounting surface.
6) Tighten filter 3/4 turn from the point of contact with mounting sur-
face using an oil filter wrench.
Special Tool
(A): 09915-47310
Tightening Torque (Reference)
(a): 14 N·m (1.4 kg-m, 10.5 lb-ft)
MAINTENANCE AND LUBRICATION 0B-7