MARUTI SUZUKI 800, Руководство по обслуживанию

Страница: 255 / 644

16) Draw right and left drive shafts out of differential side gears.
NOTE:
Be careful not to damage brake flexible hose.
17) Remove water pump and A/C compressor belts (if equipped).
When removing A/C compressor belt, first remove water pump
pulley.
18) Recover refrigerant from refrigeration system by using recov-
ery and recycling equipment, refer to Section 1B (if equipped).
19) Disconnect suction and discharge hoses from compressor, re-
fer to Section 1B (if equipped).
NOTE:
Cap open fittings immediately to keep moisture out of
system.
20) Remove A/C compressor, upper and lower bracket (if
equipped).
21) Check to ensure all hoses, electric wires and cables are dis-
connected from engine and transmission.
22) Set a piece of wire across the hook on intake manifold and
transmission case so that engine can be lifted by using chain
block.
23) Remove transmission left side mounting and mounting brack-
et.
24) Remove bolts securing engine member to make engine ready
for removal.
25) Lower engine assembly together with transmission and en-
gine member out of vehicle slowly and carefully.
ENGINE MECHANICAL (F8B ENGINE) 6A-7