MARUTI SUZUKI 800, Руководство по обслуживанию

Страница: 334 / 644

5) Apply engine oil to rocker arm shaft and rocker arms.
6) Install rocker arm shaft, rocker arm (intake side) and rocker
arm spring.
7) Install rocker arm shaft bolts and tighten them to specified
torque.
Tightening Torque
(a): 22 N
.
m (2.2 kg-m, 16.0 lb-ft)
8) Install camshaft timing belt inside cover.
9) Install camshaft timing belt pulley to camshaft while fitting pin
on camshaft into slot.
10) Using special tool, tighten pulley bolt to specified torque.
Tightening Torque
(a): 54 N
.
m (5.4 kg-m, 39.0 lb-ft)
Special Tool
(A): 09917-68221
11) Install belt tensioner, timing belt, outside cover, crankshaft
pulley, A/C compressor belt (if equipped) and water pump belt
as previously outlined.
12) Adjust valve clearance as previously outlined.
13) Install cylinder head cover.
14) Connect negative cable at battery.
15) Confirm that ignition timing is within specification referring to
Section 6F.
ENGINE MECHANICAL (F8D ENGINE) 6A1-31