manualshive.com logo in svg

Manitowoc GROVE GMK, Руководство по безопасности

Поделиться
Скачать
Manitowoc GROVE GMK Скачать руководство пользователя страница 24

2 General safety instructions
2.6 Your truck crane

18

3 303 022 en

Safety manual

0

4.1

1.

202

0

 2.6         

Your truck crane

A new truck crane needs to be run in during the first operating hours!

Observe the run-in regulations for your truck crane; 

à

Supplied maintenance 

manual

.

The crane produced by 

Manitowoc Crane Group Germany GmbH

 is a truck 

crane!

The truck crane was designed and built in accordance with the latest technology 
and the recognised safety regulations. The laws, regulations, requirements, 
stipulations and guidelines applicable to truck cranes are complied with. 
Nevertheless, the operator or third parties can still be endangered and the 
crane or other property put at risk while using it.

The truck crane is not designed for loading and unloading work (continuous op-
eration without sufficiently long interruptions). During loading and unloading work, 
observe the hydraulic oil temperature, the shortened maintenance intervals and, 
in the case of the hoists, the increased reduction of the theoretical service life 
(

à

Supplied maintenance manual

).

The truck crane may only be modified with the approval of 

Manitowoc Crane Group Germany GmbH

!

The manufacturer shall not be liable for malfunctions and damage if the truck 
crane is modified or converted without our approval, in particular if the effective-
ness of built-in safety devices is intentionally reduced or cancelled.

Your truck crane must be safe for use on the road and during operations!

Carried out the prescribed checks every time before putting the truck crane into 
operation. 

à

Supplied operating manual

à

Supplied maintenance manual

If you are in doubt about the traffic and operational safety of the truck crane, 
you must stop driving or stop work immediately!

Never postpone necessary repairs.

Further information on maintenance work and repairs; 

à

Maintenance and repairs

, p. 5 - 81.

Содержание GROVE GMK

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды