manualshive.com logo in svg

Manitowoc GROVE GMK, Руководство по безопасности

Поделиться
Скачать
Manitowoc GROVE GMK Скачать руководство пользователя страница 87

5 Maintenance and repairs

5.1 Maintenance

Safety manual

3 303 022 en

81

0

4.1

1.

202

0

 5  

Maintenance and repairs

Testing the truck crane by lifting an excessively heavy load (overload testing) is 
prohibited!
This poses the risk of hidden damage that can lead to severe accidents during 
subsequent crane operation. If locally applicable national regulations require the 
truck crane to be tested by lifting an excessively heavy load (overload test), 
always first consult 

Manitowoc Crane Care

.

 5.1         

Maintenance

This section is not a maintenance manual!
This section supplements the information in the supplied 

maintenance manual

.

Insufficient maintenance and failure to comply with maintenance deadlines will 
result in damage and malfunctions that impair safety during driving and crane 
operation! Some possible consequences of insufficient maintenance are listed 
here. 

– Lack of oil, grease and antifreeze 

– Faulty compressed air and hydraulic systems 

– Faulty brakes 

– Faulty tyres or wheel rims 

– Damage to the hoist rope

– Malfunctions due to dirt

 5.1.1         

Maintenance intervals

Also carry out care and maintenance work carefully within the specified intervals 
for your own safety. Do not postpone maintenance work that is due. 

Make sure that, in addition to the maintenance intervals, the specified intervals 
for periodic inspections are also observed.

The maintenance intervals required for your truck crane and the maintenance 
work to be carried out are described in the supplied 

maintenance manual

.

For some truck cranes, online tools or maintenance apps are also available that 
allow you to individually compile the description of the maintenance work and the 
spare parts and consumables required for upcoming maintenance intervals.

s

Содержание GROVE GMK

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды