manualshive.com logo in svg

Manitowoc GROVE GMK, Руководство по безопасности

Поделиться
Скачать
Manitowoc GROVE GMK Скачать руководство пользователя страница 14

2 General safety instructions
2.4 The helpers

8

3 303 022 en

Safety manual

0

4.1

1.

202

0

Inform your replacement!

In the event of a change of crane operator, you must inform your replacement 
about the condition of the crane and all agreements made.

Ensure cleanliness and tidiness!

The truck crane is your workplace. Keep it clean!

Clean your shoes and hands before climbing on 
to or getting into your truck crane.

Remove any dirt, fluids, oil and grease. Pay spe-
cial attention to the cleanliness of steps, ladders 
and stepping areas, warning and information 
signs, windows, mirrors and video systems, as 
well as all surfaces that can be walked on.

You should also clean the driver's cab and the 
crane cab at regular intervals.

Do not leave lifting gear (chains, ropes, slings) 
lying around on the deck of the truck crane. They 
pose an increased trip hazard. Always stow lifting 
gear properly that is not needed.

 2.4         

The helpers 

The helpers are persons outside the crane cab involved in crane operation. They 
include banksmen, slingers and persons who secure the load with a guide rope.

Qualifications

Only experienced personnel who are familiar with the valid accident prevention 
regulations and the rigging personnel are authorised to sling loads and guide the 
crane operator. Make sure that these persons are provided with the required 
information in the form of instructions prior to starting work. Use well-trained, 
qualified and experienced helpers.

Содержание GROVE GMK

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды