manualshive.com logo in svg

Manitowoc GROVE GMK, Руководство по безопасности

Поделиться
Скачать
Manitowoc GROVE GMK Скачать руководство пользователя страница 89

5 Maintenance and repairs

5.1 Maintenance

Safety manual

3 303 022 en

83

0

4.1

1.

202

0

Observe all warning and information signs on the truck crane. 

For walking on the truck crane during maintenance work, the same information 
applies as for walking on it during rigging work.

à

Supplied operating manual

à

Walking on the truck crane

, p. 4 - 44

Remove any ice and snow from the truck crane before commencing crane 
operation. 
Keep all handles, steps, step treads and ladders free of snow and ice.

Do not carry out maintenance work unless the truck crane is standing on flat, firm 
ground and is secured against rolling away. 

Perform maintenance work after the truck crane 
has been shut down. Always ensure that the truck 
crane is well-protected against unauthorised 
start-up before starting maintenance work.

Lock the crane cab and driver's cab and take the 
keys.

Attach warning signs. 

If due to exceptional circumstances, the truck 
crane needs to be put into operation for certain 
types of maintenance work, great care must be 
taken in the range of moving parts. There is a 

risk of injury

! 

The RCL must never be overridden for maintenance work either. Enter the 
current rigging mode at the RCL before performing a crane movement. You might 
need to change the rigging mode (e.g. counterweight rigging) to be able to 
perform the movement required for maintenance work.

Clean those parts of the truck crane on which maintenance work is to be carried 
out. Especially the vicinity of oil filling, oil checking and oil drain openings. Always 
clean the lubricating nipples before pressing in grease.

When changing the oil, let it run out at operating temperature. Wear suitable 
personal protective equipment and make sure that oil does not run out in an 
uncontrolled manner. 

Risk of scalding!

s

Содержание GROVE GMK

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды