105
OxyMag_rev26
•
Default values of the alarms are only for initial reference. Reset the alarm limits as needed
by the patient.
•
There may be danger if different default alarm values are used for the same or similar
equipment in the same area.
•
Setting the alarm limit to its extreme value may make the alarm system inadequate. Adjust
the limits as needed by the patient.
•
Alarm settings will not change when power is lost for 30 seconds or less. In this case, the
equipment will be powered by non-interchangeable internal battery.
•
Oxygen monitoring is achieved accurately within 20 seconds of initialization.
Alarms related to the equipment and ventilation :
•
Low Battery
•
Low Network Pressure
•
Disconnection from the Breathing Circuit
•
Obstruction of the Breathing Circuit
•
Apnea
•
No AC power
Alarms related to the external sensors:
•
Capnography Sensor
o
Caution IRMA adapter
o
Restart IRMA
o
Replace IRMA
o
CO
2
out of scale
o
Reading Error IRMA
o
Calibrate IRMA
•
SpO
2
Sensor
o
Caution SpO
2
Sensor (Sensor out of
Finger)
o
Check SpO
2
o
Check Cable
o
Low Perfusion
o
Looking for pulse
o
Enabling SpO
2
o
SpO2 demo
