LumaSense SmartDGA, Руководство по оборудованию

Страница: 92 / 114

SmartDGA Hardware Manual Troubleshooting
•
92
Blue Flashing 5 seconds
every 15 seconds Indicates warning
Red Flashing 5 seconds
every 15 seconds Indicates alarm
Red & Blue Flashing, 5 seconds
blue followed by 5
seconds red
(repeated
until condition clears or is
reset)
Indicates Status and Error Condition
A Status and Error condition indicates that one
of the several monitored variables
(temperature, pressure, sensor operations, etc.)
has exceeded the set point for that condition.
On the EZHub, the LED indication will be a solid
red and blue and remain solid until the
condition clears or is reset.
Yellow & Green Flashing, 5 seconds
green followed by 5
seconds yellow
(repeated until condition
clears or is reset)
Indicates Loss of Communication
On the EZHub, the LED indication will be a solid
green and yellow and remain solid until the
condition clears or is reset.
Note:
SmartDGA Status and Error Codes will require you to contact the factory for
further guidance on corrective actions and diagnosis. Most Error Codes will require unit
maintenance which may require the unit to be returned to the factory for repair.
8.1.2 SmartDGA EZHub
TM
Controller
The LED indication light on the SmartDGA EZHub controller will be the same as on the instrument,
except it will not flash and will be a solid indication. The color indications are noted below.