LumaSense SmartDGA, Руководство по оборудованию

Страница: 51 / 114

SmartDGA Hardware Manual SmartDGA System Installation
•
51
PROVIDED BY LUMASENSE – Two Instruments (TRF & LTC)
Qty Description Part #
1 EZHub, LTC and XFMR (EZ0010) 015-0010-01
1 Kit, EZHub, LTC and XFMR 915-0031-01
2 Power and Communications Cable DGA-EZHub, STD, 10m 815-0236-01
1 Kit, Conn, 1 Relay, Facility, EZHub 815-0043-01
8 Connector, Relay MC 15/3 47-1407
1 Connector, System RS485 Out 47-1408
2 Connector, Unit RS485 47-1409
2 Connector, Unit Power 47-1410
1 Connector EZHub Power 47-1411
1 Adapter-Male Micro B to Female A 57-0045
1 Lug Ring, Blue (for power to the EZHub) 95-1970
2 Lug Ring, Red (shield ground for cable to instrument) 90-2249
50 Ferrule, AL 0.75-8 GY (Crimp Pins) (You will have extra) 99-10043
3 Ferrule, (Large Crimp Pins for EZHub Power Connector) 99-10352
1 Kit, EZHub Mounting Hardware 815-044-01
8 Screw, Pan Head 6-32X.50
(4 for wall mount or 8 for panel mount)
02615-08SS1
8 Washer, #6, Flat (4 for wall mount or 8 for panel mount) 99-10000
8 Washer, #6, Split (4 for wall mount or 8 for panel mount) 99-39908-100
1 Kit, Bracket, Wall Mount, EZHub 815-0045-01
2 Bracket, Wall Mount 115-0074-01
1 Kit, Bracket, Panel Mount, EZHub 815-0046-01
1 Bracket, EZHub Panel Mount L-Side 115-0087-01
1 Bracket, EZHub Panel Mount R-Side 115-0097-01
1 Kit, Fuse, EZHub (this is a spare) 815-0209-01
1 Kit, USB-ISO-485 / Cable Assembly (RS485 to USB Converter) (used for
connection with a PC)
815-0052-01
PROVIDED BY CUSTOMER (or ordered separately)
Qty Description Part #
1 Screw driver, Phillips (#3, 3/16”)
1 Screw driver, Phillips (#1, 1/16”)
1 Screw driver, Flat Head (small)
4 Sets of hardware for attaching EZHub brackets to wall, panel, etc.
1 Drill to fasten the EZHub brackets to the main vertical support
1 Power cable (AC IN)
1 Conduit to insulate the shield drain wire
Gland seal for cable at conduit
Crimper and Stripper (for terminating cables)