Lucent 23N12 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 176

Lucent 23N12 Скачать руководство пользователя страница 62

Chapter 3 Configuring the OC-3 Mode Ports and Channels Using the Console

Configuring the OC-3 Working and Standby Module Pair

3-32

255-700-714R11.0

PacketStar

®

PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide

, Issue 1

Release 11.0.0

APS/MSP Commands (Left Panel)

Apply APS/MSP Command

Runs the command you selected in the APS Command or
MSP Command field.

Configuration Commands (Right Panel)

Apply APS/MSP Parameters

Applies the configuration values for both the primary and the
standby OC-3c APS or MSP modules.

Reset APS/MSP Display

Resets the fields to the last set of saved values.

Go Back to Port Configura-
tion

Redisplays the Port and Channel Configuration window.

Table 3-14. Channelized OC-3STM-1 APS/MSP Configuration Window Commands (Continued)

Command

Function

Table 3-15. Channelized OC-3 MM APS Configuration Window Field Descriptions

Field Name

Field Value

Description

APS Statistics Panel (display only)

Working Port SF
Dur

Default:

00000000

Range: 0–99999999

Format: Numeric
(seconds)

Displays the amount of time in seconds that the work-
ing port has had a failed signal (SF) above the selected
threshold bit error rate. This value changes dynami-
cally for the life of the connection.

Working Port SD
Dur

Default:

00000000

Range: 0–99999999

Format: Numeric
(seconds)

The amount of time in seconds that the working port
has had a degraded signal (SD) above the selected
threshold bit error rate. This value changes dynami-
cally for the life of the connection.

Prot. Port SF Dura-
tion

Default:

00000000

Range: 0–99999999

Format: Numeric
(seconds)

The amount of time in seconds that the protection port
has had a failed signal (SF) above the selected thresh-
old bit error rate. This value changes dynamically for
the life of the connection.

Prot. Port SD Dura-
tion

Default:

00000000

Range: 0–99999999

Format: Numeric
(seconds)

The amount of time in seconds that the protection port
has had a degraded signal (SD) above the selected
threshold bit error rate. This value changes dynami-
cally for the life of the connection.

Switch Over Counts Default:

00000

Range: 0–99999

Format: Numeric
(integer)

The number of times that switchover of active status
from one module to the other in the pair has occurred.
This is an incrementing value displayed as an integer.

TX K1/K2

*

Default:

00/00

Range: 99/99

Format: Hexadecimal
bytes

For the transmit port, the protocol for the APS chan-
nel, carried in the K1 and K2 bytes, in the signal in the
protection line. The K1 byte is used to indicate a
request by a channel for a switch action. The K2 byte is
used to indicate the bridging actions performed at the
LTE, and the provisioned architecture and mode of
operation

«
...
60
61
62
63
64
...
»

Содержание 23N12

















































































































































































Отзывы:

Нет отзывов