Lucent 23N12, Руководство пользователя, Страница: 123 / 176

255-700-714R11.0 4-33
PacketStar
®
PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide , Issue 1 Release 11.0.0
Chapter 4 Configuring the STM-1 Mode Ports and Channels Using the Console
Strapping One or More Channels on A Virtual Port
If you select CircuitEmulation as the interface type, the Signaling field
displays. If you want to strap any channels together, do not change the
Signaling field default, which is
Disabled .
3
Begin the strapping process by using the arrow key to highlight an Avail-
able DS0 that you want to strap with other DS0s in the [Available DS0s]
field.
4
Press Enter. This action displays an X below DS0 number. Repeat steps 3
and 4 until you have strapped all the DS0s you want to strap for the
selected channel. (In the sample configuration shown in Figure 4-14,
channels 1 through 5 have been strapped).
5
Select the Apply Configuration command.
In the [DS0s Strapped] field (display only), the values for the DS0s you
just selected are displayed (see Figure 4-15). This first group of strapped
DS0s are now shown as Channel 1 on the Ch STM-1 Virtual E1 Channel
Configuration window.
6
To strap together more DS0s for another channel in the selected port,
reselect the Channel field and enter the next channel number you want
to strap.
7
Repeat step 2-6 for the rest of the available DS0s (or as many as you
want to use).
8
To view the strapped DS0s and their associated channels at any time,
select the
Show Straps command on the Ch STM-1 Virtual E1 Port
Configuration window. The Ch STM-1 SM Virtual E1 DS0s Strap Display
window is displayed (see Figure 4-15).
End
Figure 4-14. Strapped Channels 1 Through 5 Displaying After Apply
Configuration Command Has Been Applied