Lucent 23N12 Скачать руководство пользователя страница 105 | Manualshive

Страница: 105 / 176

Lucent 23N12 Скачать руководство пользователя страница 105

255-700-714R11.0

4-15

PacketStar

®

PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide

, Issue 1

Release 11.0.0

Chapter 4 Configuring the STM-1 Mode Ports and Channels Using the Console

Configuring All Channels on a Port (Channelization Disabled)

APS or MSP
Configured

Default:

Unpro-

tected

Range: N/A

Format: Predefined

Specifies whether two module(s) are to be set up in adjacent
odd- and even-numbered slots for APS/MSP protection
mode or not.

Unprotected

Select this value if the module is being configured as a stan-
dalone unprotected module, and

not

being paired with

another module in a 1+1 protection configuration.

Working

Select this value when the module is being paired with
another identical 1+1 APS-compatible module (single-mode
or multimode with the same operating mode (see Operating
Mode field)) in a 1+1 APS configuration. Before selecting
this value, the modules must be installed as an adjacent,
consecutively numbered, pair in the PSAX chassis. To verify
the module placement, return to the Equipment Configura-
tion window and locate the modules. The 1+1 protection
modules can only be configured when they are installed in a
consecutively numbered odd/even order, such as slots 9 and
10, 11 and 12, and so on, and not in an even/odd numbered
order, such as slots 10 and 11. In this arrangement, either
module can serve as the primary (working) module or the
standby (protection) module. After selecting this value, click
the

Apply Port Configuration

command. The [Working

Slot] and [Protection Slot] fields appear with the appropriate
slot numbers listed, the status of the modules, and the APS
Configuration window is available through the

Configure

APS

command.

[WorkingSlot]

Default:

Active

Range: N/A

Format: Predefined

Displays the slot number and status of the working module
in a 1+1 APS configured module pair. This field is displayed
only when the APS Configured field is set to

Working

.

Active

Indicates the working module is functioning properly and
the protection module is in standby.

Standby

Indicates the working module is in standby and the protec-
tion module is active.

[ProtectionSlot]

Default:

Standby

Range: N/A

Format: Predefined

Displays the slot number and status of the protection mod-
ule in a 1+1 APS configured module pair. This field is dis-
played only when the APS Configuration field is set to

Working

.

Active

Indicates the protection module is functioning properly and
the working module is in standby.

Standby

Indicates the protection module is in standby and the work-
ing module is active.

Table 4-5. Channelized OC-3 or STM-1 CES Port Configuration Window Field Descriptions (Continued)

Field Name

Field Value

Description

«
...
103
104
105
106
107
...
»

Содержание 23N12

















































































































































































Отзывы:

Нет отзывов