Lucent 23N12 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 176

Lucent 23N12 Скачать руководство пользователя страница 15

PacketStar

®

PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide

, Issue 1

Release 11.0.0

255-700-714R11.0

1-1

1

Getting Started

Purpose of This Guide

The

PacketStar

®

PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide

provides a description of the 1-Port Channelized OC-3/STM-1 CES. It also
provides information on how to configure the module ports and channels.

The

PacketStar

®

PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide

provides a description of the 1-Port Channelized OC-3/STM-1 CES modules
(23N12 (MM)/23N13 (SM)). It also provides information on how to config-
ure the module ports and channels.

For information on configuring interfaces and provisioning connections
through the PSAX console interface, see the

PacketStar

®

PSAX Connections Pro-

visioning Guide.

If the

Navis

®

EMS-PSAX interface is being used, see the

Navis

®

EMS-PSAX Interface and Connection Provisioning Guide

.

Note:

If you are using this module for the first time, you should read
through this guide in its entirety before beginning the configura-
tion process. The chapters in this guide are arranged in the logical
order of normal configuration and should be performed in that
order for the module to operate successfully.

Audience for This Guide

The information in this guide is intended for users who will configure ports
and channels for the 1-Port Channelized OC-3/STM-1 CES modules, in the
PSAX Multiservice Media Gateway system.

The information in this guide is intended for users who will configure ports
and channels for the 1-Port Channelized OC-3/STM-1 CES in the PSAX Mul-
tiservice Media Gateway system.

What You Should Know

Before you use this document or operate a PSAX system, you should already
understand and have experience with the following:

•

ATM Forum, Frame Relay Forum, and other telecommunications specifica-
tions

•

Ethernet network capabilities

•

Internet Protocol capabilities

•

Data network design

•

Telephony network design

«
...
13
14
15
16
17
...
»

Содержание 23N12

















































































































































































Отзывы:

Нет отзывов