96
Chapter 3 • ADM technology
Connection of detectors Labor Strauss
As described above, the connection of branch lines during the automatic address assignment is not
allowed. Should a branch be present, the elements on the branch line have to be removed
BEFORE
starting the AUTO-addressing procedure. The addresses of these elements have to be programmed
manually. If the branch line is not removed from the loop
BEFORE
starting the addressing procedure,
the addressing of the loop elements will be incorrect.
If an RF Gateway (FI7x0/RF/W2W) is present on the loop, the addresses of the already configured
wireless elements are also automatically assigned. A later expansion of the RF system (further wireless
detectors) is not possible, as there may be an overlap of addresses after the insertion of wireless detect-
ors. The automatic assignment of addresses also applies to multi-modules. A unique address will be
allocated to each input and output.
Connection-LST.odt / 2009 / AN9161298
200/96
96
