LS tractor MT342, Руководство оператора

Страница: 116 / 264

3 - 40
GSP lever
(5) Ground Speed PTO (GSP)
lever (if fitted)

This lever is used to select the ground speed
PTO(GSP) or independent PTO.
 The ground speed PTO rotates proportionally
according to the rear wheel speed. The
independent PTO rotates proportionally
according to the engine speed regardless of the
rear wheel speed.
 If you pull the lever backward, the ground speed
PTO (GSP) is engaged.
 If you push the lever forward fully, the ground
speed PTO (GSP) is disengaged and
independent PTO is available.
 Before operating the GSP lever,
- press a clutch pedal, brake pedals, and stop
the tractor completely.
- put the PTO switch in OFF position and stop
the PTO shaft completely.
GSP
Independent PTO
(6) Clutch engaging speed
adjustment knob (MPC models
only)
 This knob is used to adjust the engaging time of
the main clutch actuated by a power clutch valve.
 This is only for mechanical transmission models
with power clutch system. (MPC)
 You can adjust the engaging speed
appropriately depending on your working
conditions.
 If turning the knob with a “-” screw driver or
other suitable tools;
- clockwise : for slower engaging speed
- counter-clockwise : for faster engaging speed.
Notice
▶
When handling the knob, do not over-tighten the knob. It may cause damage or a
failure of the connecting parts of the adjustment linkage.
Faster Slower
Clutch engaging speed
adjustment knob