LS tractor MT342, Руководство оператора

Страница: 123 / 264

3 - 47
Four wheel
drive lever
2WD
4WD
(11) Four wheel drive lever (4WD)
 This lever is used to engage/disengage the four
wheel drive (4WD). Push it downward for
engaging the 4WD.
 Before operating the 4WD lever, press down the
clutch pedal, brake pedals, and stop the tractor
completely.
 4WD is very effective in the following cases.
- When increasing the towing power for heavy
work.
- In case of working in sandy soil.
- To prevent tractor from spinning in wet land.
▶
When driving on public roads, disengage the 4WD. If not, it may cause damage of
the tires and transmission drive line and a serious accident. After working in the
field, disengage the 4WD before coming out from the field.
▶
While driving the tractor at high speed while the 4WD is engaged, sharp steering
may cause a serious accident.
▶
Only operate four wheel drive lever by hand. If stepping on it , it may cause a
failure.
Caution
(10) PTO gear lever (if fitted)
 540 rev/min and neutral position is available.
 When attaching/detaching the rear implement,
place the PTO gear lever to the neutral position.
 Before operating the PTO gear lever, depress
the clutch pedal and put PTO switch to
OFF
position, and stop the PTO shaft completely.
 To engage the 540 rev/min gear, push the PTO
gear lever forward.

For further information about the PTO shaft, see
chapter 4-5-(2) in this manual.
PTO gear
lever
Notice
▶
Operate the PTO gear lever by correct “I” pattern. If operated diagonally, it may
cause a failure.
▶
If the PTO gear lever is not engaged smoothly, shift the lever again after lifting up
the implement from the ground to align the drive shaft.
540rpm
Neutral
Forward