LS tractor MT342, Руководство оператора, Страница: 141 / 264

4 - 3
HST type
1. Sit in driver’s
seat and apply
parking brake
2. Place the range gear shift lever
and HST forward/reverse pedal in
NEUTRAL , and PTO switch in OFF .
Brake pedals
HST reverse
pedal
Throttle lever
HST forward
pedal
PTO switch
Key switch
8. Run the engine for a
few minutes to allow
engine oil and
transmission oil to warm
up.
7. Check if the battery charging
indicator and engine oil
pressure indicator are OFF
after starting engine.
If not, stop the engine
immediately and check the
problem.
3. Pull the throttle lever to
the low speed position.
6. Turn key switch to
“ START ” position. As
soon as the engine
starts, release the key
switch to “ON” position.
5. Wait until the cold start
aid indicator is OFF.
(about 10 seconds)
4. Turn key switch to “ON”
position and check if the
battery charging
indicator, engine oil
pressure indicator and
cold start aid indicator
are ON.
Caution
▶
Check each part before starting
the engine.
▶
Check if there is some other
people around before starting.
▶
Place all the levers and
switches in NEUTRAL or OFF
position.