LS tractor MT342, Руководство оператора

Страница: 169 / 264

4 - 31
(7) Using Front-end loader (optional)
Locking lever
(safety device)
Joystick lever
Lock
Loader up
Loader down
Bucket up
Bucket dump
Bucket floating
<Meaning of Symbols>
①
Safety precautions

If attaching a non-approved front-end loader or
heavy front-mounted implement, engine block or
front axle can be damaged or broken. Contact
your authorized local dealer.
 DO NOT attach any non-approved front-
mounted implement by manufacturer. If it is
ignored, and any warranty is not effective no
longer.
 If an approved front-end loader is attached,
multi-functional joystick lever in the right figure
can provide you more convenient operation.
 When operating the tractor with front-end loader,
The center of gravity of the tractor may be higher,
and the stability of the vehicle may be worse
than unattached vehicle.
-. DO NOT drive fast on a traffic load. The rolling
or tipping of the tractor can be happened easily.
-. When loading/unloading the bucket on a slope,
move the tractor straight against the slope.
-. DO NOT try to approach a stiff slope.
-. Attach the rear ballast on the 3-point linkage or
rear wheels(if applicable) to prevent overload of
the front axle and to improve the stability of the
vehicle.

When working with front-end loader, the front
visibility of the tractor may be worse than
unattached vehicle. Have to observe people and
other vehicles around the tractor.
 DO NOT allow people under the front-end loader
while lifted.
 DO NOT allow people on the bucket.
TO AVOID PERSONAL INJURY !
▶
After using the front-end loader, push the locking lever to the lock position.
▶ When leaving the tractor, lower down the front-end loader on the ground.
▶
Do not lift the front-end loader to a height from which objects may fall or roll onto
the driver.
▶
Use always the correct attachment (grab forks, buckets.. etc.) for the specific task
to perform and ensure that the load is securely kept in place.
Warning