LS tractor MT342 Скачать руководство пользователя страница 231

Страница: 231 / 264

5 - 51

①

Fuse check and replacement



How to change the fuse.

1. Remove the fuse box cover.

2. Check each fuse and remove the damaged one.

3. Replace it with a new one of the same capacity

as the damaged fuse.



Chassis fuse box is installed under the front
console and cabin fuse box is on the left cabin
pillar.



The capacity and function of each fuse is
described on the fuse box cover.

< Cabin fuse box (Cabin type) >

(2) Fuse & Main fuse

Cabin fuse
box cover

< Chassis fuse box >

▶

If the same function fuse is damaged repeatedly, contact your authorized local

dealer for check instead of using a substitute such as wire or aluminum foil.

▶

If using the substitute instead of the rated capacity fuse, it may cause a fire which

results in damage of the tractor or personal injury.

Caution

Chassis fuse box

Содержание MT342









































































































































































































































































Результаты поиска

Содержание MT342

Отзывы:

LS tractor MT342, Руководство оператора, Страница: 231 / 264

Результаты поиска

Содержание MT342

Отзывы: