LS tractor MT342 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 264

LS tractor MT342 Скачать руководство пользователя страница 69

2 - 7

(4) Seat belt



Always wear the seat belt before operating the
tractor and adjust the belt to fit your body.
1. Insert the seat belt end into the buckle until a
“click” indicates it is properly engaged.
2. To remove the seat belt from the buckle,
press the red release button on the buckle.



Check the seat belt regularly. If damaged or
frayed, replace it with a new one.

Warning

▶

If not wearing the seat belt, it may cause a serious injury in case of an accident.

- During operation, it must be required to wear the seat belt with a cab or roll-bar
installed.
- After wearing the seat belt, adjust the seat belt to fit your body.

▶

If the roll-bar is folded down or removed, do not wear the seat belt.

Seat belt

Buckle

Seat belt

Buckle

ROLL-BAR

CABIN

«
...
67
68
69
70
71
...
»

Содержание MT342









































































































































































































































































Отзывы:

Нет отзывов