LRS LineShare PRO Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 43

LRS LineShare PRO Скачать руководство пользователя страница 5

INSTALLING THE LINESHARE PRO PRO

Selecting Your Set-Up

The LineShare Pro 104 is a single line device that can
be installed on a single telephone line with or without
extension phones. This line may be part of a multi-line
telephone system.

The LineShare Pro 104 has 2 operating modes, Auto-
matic and Semi-Automatic. It can be connected in one
of the following three configurations shown below:

Typical Installation Configurations

Automatic

operation (calls are answered and processed for the entire location)

NOTE:

This application requires installation at the DE-
MARC. See “Installation at the DEMARC” for
more information.

Answers...

the call automatically.

Transfers...

all calls to the pre-designated telephone de-

vice(s) according to the tone(s) received from the call-
ing telephone device. If telephones are connected to
the LineShare Pro 104, calls without tones will transfer
directly to the designated telephone.

Automatic

operation (calls are answered and processed where the LineShare Pro 104 is

located)

Answers...

the call automatically.

Transfers...

calls to the predesignated telephone de-

vice(s) according to the tone(s) received from the call-
ing telephone device. If telephones are connected to
the LineShare Pro 104, calls without tones will transfer
directly to the designated telephones.

Long Range Systems

4

LineShare PRO

«
...
3
4
5
6
7
...
»

Содержание LineShare PRO












































Отзывы:

Нет отзывов