LRS LineShare PRO Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 43

LRS LineShare PRO Скачать руководство пользователя страница 38

To enter a new access code, perform the following steps:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 6 1 _ _ _ _ * (three beeps) * (one beep) (blank spaces represent the new

Port P1 Transfer Code)

3. Hang up the phone

A code of 0 0 0 0 disables transfers to this port.

Port P2 Transfer Code

This feature assigns the access code to transfer a call to port P2.

The Port P2 Transfer Code can be any numeric 1-4 digits not including the # key. See Pound Key Transfer Re-
quired for use with the Port P2 Transfer Code. Do not use a code that is a transfer code for another port on
the LineShare Pro 104.

The factory setting for the Port P2 Transfer Code is 2 2.

To enter a new access code, perform the following steps:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 6 2 _ _ _ _ * (three beeps) * (one beep) (blank spaces represent the new

Port P2 Transfer Code)

3. Hang up the phone

A code of 0 0 0 0 disables transfers to this port.

Port P3 Transfer Code

This feature assigns the access code to transfer a call to port P3.

The Port P3 Transfer Code can be any numeric 1-4 digits not including the # key. See Pound Key Transfer Re-
quired for use with the Port P2 Transfer Code. Do not use a code that is a transfer code for another port on
the LineShare Pro 104.

The factory setting for the Port P3Transfer Code is 3 3.

To enter a new access code, perform the following steps:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 6 3 _ _ _ _ * (three beeps) * (one beep) (blank spaces represent the new

Port P3 Transfer Code)

3. Hang up the phone

A code of 0 0 0 0 disables transfers to this port.

Long Range Systems

37

Line Share PRO

«
...
36
37
38
39
40
...
»

Содержание LineShare PRO












































Отзывы:

Нет отзывов