LRS LineShare PRO Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 43

LRS LineShare PRO Скачать руководство пользователя страница 35

This feature has a range of 1 to 30 rings to answer a call. If this ring count is set higher than 1 ring and a call
is answered from an extension phone before the LineShare Pro 104 answers, the single tone transfer is de-
activated. The tone transfer access codes still function.

The factory setting for the Rings to Answer Call is 1 ring. To change this feature, perform the following steps:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 4 0 _ _ * (three beeps) * (one beep) (blank spaces represent the new Rings

to Answer Call)

3. Hang up the phone

Rings to Port P1

This feature determines the number of rings that the LineShare Pro 104 provides to port P1 with a range of
0-30 rings and operates in either the Automatic mode or the Semi-Automatic mode.

The factory setting for the Rings to Port P1 is 6 rings.

To change this feature, perform the following steps:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 4 1 _ _ * (three beeps) * (one beep) (blank spaces represent the new Rings

to Port P1)

3. Hang up the phone

Rings to Port P2

This feature determines the number of rings that the LineShare Pro 104 provides to port P2 with a range of
0-30 rings and operates in either the Automatic mode or the Semi-Automatic mode.

The factory setting for the Rings to Port P2 is 6 rings.

To change this feature, perform the following steps:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 4 2 _ _ * (three beeps) * (one beep) (blank spaces represent the new Rings

to Port P2)

3. Hang up the phone

Rings to Port P3

This feature determines the number of rings that the LineShare Pro 104 provides to port P3 with a range of
0-30 rings and operates in either the Automatic mode or the Semi-Automatic mode.

The factory setting for the Rings to Port P3 is 6 rings.

To change this feature, perform the following steps:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 4 3 _ _ * (three beeps) * (one beep) (blank spaces represent the new Rings

to Port P3)

3. Hang up the phone

Long Range Systems

34

Line Share PRO

«
...
33
34
35
36
37
...
»

Содержание LineShare PRO












































Отзывы:

Нет отзывов