LRS LineShare PRO Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 43

LRS LineShare PRO Скачать руководство пользователя страница 13

Long Range Systems

12

LineShare PRO

Semi-Automatic Mode

NOTE:

The routing tones and access codes can be changed through programming.

The LineShare Pro 104 will ring the Primary port up to 6 times (Rings to port P1 in this example). If the call
remains unanswered after 6 rings, the LineShare Pro 104 will transfer (Automatic No Answer Transfer) the
call to the Secondary port. The Automatic No Answer Transfer is designed to accommodate fax machines that
do not produce a CNG tone, and can be turned off through programming.

If a device connected to port P2, P3 or P4 answers a call only tone transfers are allowed.

port P1 #

1 1

tone

port P2 #

2 2

tone

port P3 #

3 3

tone

port P4 #

4 4

tone

Any time a call is transferred to another port, the port that is off-hook with the call is the only port of the Line-
Share Pro 104 that is allowed to transfer the call. The originating port will receive a busy tone once the trans-
fer occurs. Call transfers may also come from the remote (i.e. calling telephone,or an extension phone not
connected to the LineShare Pro104.

To accommodate faxes that do not produce CNG tones, the Automatic Primary Port Transfer feature can
transfer a call to another port (Secondary Port Selection) when using an answering machine with the Line-
Share Pro 104. The factory setting for this feature is OFF, and uses the Primary Port Transfer Timer to set pa-
rameters for transfer as described later in this guide.

The factory setting for the LineShare Pro 104 is the Automatic mode. To change the operating mode, see
"Programmable features of the LineShare Pro 104" for more information.

«
...
11
12
13
14
15
...
»

Содержание LineShare PRO












































Отзывы:

Нет отзывов