manualshive.com logo in svg

LRS LineShare PRO, Руководство оператора, Страница: 41 / 43

Поделиться
Скачать
LRS LineShare PRO Скачать руководство пользователя страница 41

REGULATORY COMPLIANCE INFORMATION

The LineShare Pro 104 complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On the underside of this equipment is a label that contains, among other information, a product identifier in
the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
USOC: When ordering service from the telephone company for the equipment the following information
should be supplied: Universal Service Order Code (USOC): RJ11C or RC13C.  

Plug and Jack: The plug and jack used to connect this equipment to premise wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant tele-
phone cord and modular plug is provided with this product. The telephone cord is designed to be connected
to a compatible modular jack that is also compliant. See installation instructions for details.

Ringer Equivalency Number (REN): The REN is used to determine the number of devices that may be con-
nected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in re-
sponse to an incoming call. In most but not all areas, the sum of the RENs should not exceed five (5.0). To
be certain of the number of devices that may be connected to a line, as determined by the total RENs, con-
tact the local telephone company. The REN for the equipment is part of the ACTA/FCC number that has the
format US:AAAEQ##TXXXX. The digits represented by the ## are the REN without the decimal point (e.g.,
01 is a

REN of 0.1) and are followed by the Ringer Class (A or B).

Harm to the Network: If this equipment causes harm to the telephone network, the telephone company will
notify you in advance that the temporary discontinuance of service may be required. But if advance notice
is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised
of your right to file a complaint with the FCC if you believe it is necessary. Notification of Changes in Tele-
phone Company Equipment: The telephone company may make changes in its facilities, equipment, opera-
tions or procedures that could affect the operation of the equipment. If this happens, the telephone company
will provide advance notice in order for you to make necessary modifications to maintain uninterrupted serv-
ice.

Repairs or Returns: If trouble is experienced with this equipment, for repairs or warranty information, con-
tact Long Range Systems at 800-437-4996. If the equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the equipment until the problem is resolved. Only a
qualified factory representative should make repairs.

Party Lines: This equipment must not be used on party lines.

Alarm Equipment: You should ensure that this equipment does not disable alarm equipment in installations
where the alarm equipment utilizes the same telephone network connection as this equipment. If you have
questions about what will disable the alarm equipment, consult your telephone company or a qualified in-
staller.

Electrical Safety Advisory: Telephone companies report that electrical surges, typically lightening transients,
are very destructive to customer terminal equipment connected to AC power sources. This has been identi-
fied as a major nationwide problem. A commercially available, power surge arrestor is recommended for use
with this equipment to minimize damage in the event of an electrical surge.

FCC Rules Part 15--Computing Devices Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct

the interference by one or more of the following measures :1- Reorient or relocate the receiving antenna. 2-
Increase the separation between the equipment and receiver. 3- Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV

Long Range Systems

40

Line Share PRO

Содержание LineShare PRO












































Отзывы:

Нет отзывов