LRS LineShare PRO Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 43

LRS LineShare PRO Скачать руководство пользователя страница 31

3. Hang up the phone

To turn this feature OFF:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 0 1 3 * (three beeps) * (one beep)

3. Hang up the phone.

Caller ID Pass Thru

NOTE:

This feature has been superseded by the Caller ID Retransmission (Store and Forward) feature
that has better functionality. This feature has been included for compatibility purposes with
older installations.

This feature allows Caller ID devices to be connected directly to the Primary port of the LineShare Pro 104.

This feature requires Caller ID service activation from the phone company. Also see the Caller ID Retrans-
mission section.

Operation in the Automatic mode and Semi-Automatic mode vary as follows:

Automatic Mode

When the LineShare Pro 104 is in the Automatic mode, the first ring of a call passes directly to the Primary
port.  Between the first and second rings, the Caller ID device will display its information.  The LineShare Pro
104 answers the call before the start of the second ring and processes the call normally.  All extensions
phones will ring.  If Distinctive Ring Service Detection is turned ON, only the primary port will receive the
Caller ID information even if the primary port is not the designated port for the distinctive ring pattern.  The
second incoming ring will be processed as described in "Distinctive Ring Service."

Semi-Automatic Mode

In this mode, Caller ID is always ON. When a call comes in, the first ring of a call passes directly to the Pri-
mary port. Between the first and second rings, the Caller ID will display its information, and the call is then
processed normally. NOTE: If Distinctive Ring Service Detection is turned ON, the second ring will be
processed as described in "Distinctive Ring Service."

The factory setting for Caller ID Pass Thru is OFF. Caller ID Retransmission must be OFF before this feature
is turned ON.

To turn this feature ON:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 1 1 4 * (three beeps) * (one beep)

3. Hang up the phone

To turn this feature OFF:

1. Take the phone in port P2 off-hook

2. Press # * (three beeps) 0 1 4 * (three beeps) * (one beep)

3. Hang up the phone

Long Range Systems

30

Line Share PRO

«
...
29
30
31
32
33
...
»

Содержание LineShare PRO












































Отзывы:

Нет отзывов