Computer Calls Using Distinctive Ring Service from the Telephone Company
As previously described, the LineShare Pro 104 is capable of routing calls based upon the phone company's
Distinctive Ring service. Each telephone device is designated to a specific port and ring signal on the Line-
Share Pro 104. Callers simply dial the specific phone numbers assigned to the desired device and the Line-
Share Pro 104 transfers the call as described in the section Distinctive Ring service.
Intercom
FIf the LineShare Pro 104 is installed with phones connected to all ports, this feature also allows an intercom
path between ports. To make an internal call to another port, perform the following procedures:
1. Take a phone connected to the LineShare Pro 104 off-hook.
2. Press one of the following transfer codes from a tone phone:
* * 1 1 for port P1
* * 2 2 for port P2
* * 3 3 for port P3
* * 4 4 for port P4
3. Place the phone receiver on-hook when finished.
Using Telephones with the LineShare Pro 104
Answering Incoming Calls
Incoming calls can be answered from an extension phone (if Extension Detection is turned
ON) or from a phone device connected to the Primary port. After the call is answered,
conduct the call normally, for as long as desired.
1. If, after answering a call, you hear silence on the line, the call could be coming from a fax that does
not produce a CNG tone. Simply transfer the call to the port that the fax is connected to by press-
ing one of the following:
port P1 #
1 1
port P2 #
2 2
port P3 #
3 3
port P4 #
4 4
2. In the Semi-Automatic mode, if you hear a single frequency tone or an access code for another port
after answering a call, hang up the phone. The call will be transferred automatically.
Long Range Systems
17
Line Share PRO