LRS LineShare PRO Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 43

LRS LineShare PRO Скачать руководство пользователя страница 15

Distinctive Ring – Automatic Mode

NOTE:

The distinctive ring pattern, routing tones and access codes can be changed through program-
ming.

If the LineShare Pro 104 detects any of these signals, it transfers the call to the appropriate port. If the Line-
Share Pro 104 does not detect any of these signals, it will transfer the call to the port designated in the DRS
Assignment.

The LineShare Pro 104 answers the call on the first ring (Rings to Answer Call) unless the DRS Assignment
is not set for that line. (This means the LineShare Pro 104 will only process distinctive rings that have been
programmed and ignore all other ring styles.)

If a device connected to another port on the LineShare Pro 104 answers a call, the LineShare Pro 104 will dis-
able the Single Tone Detection feature (if the associated timer has not expired). Then only tone transfers are
allowed as follows.

port P1 #

1 1

tone

port P2 #

2 2

tone

port P3 #

3 3

tone

port P4 #

4 4

tone

Any time a call is transferred to another port, the port that is off-hook with the call is the only port that will
be allowed to transfer the call. The originating port will receive a busy tone once the transfer occurs.

NOTE:

Extension phones not connected to the LineShare Pro 104 will only ring one time (Rings to An-
swer Call) on inbound calls and cannot answer calls unless Extension Detection is turned ON.

Long Range Systems

14

LineShare PRO

«
...
13
14
15
16
17
...
»

Содержание LineShare PRO












































Отзывы:

Нет отзывов