CDM816D WHEEL LOADER
41
3.
Drive axle oil
Add the oil from the oil filler on left and right wheel housings until the oil spills when the oil plug in the
middle of axle housing is open.The oil is used to lubricate the main reducer and hub reducer.
4.
Oils for steering system and working hydraulic system
Add oil from the oil filler at the engine oil tank until the oil pointer in the tank points between the upper
and lower oil pointer holes. The oil is used by the system as pressure oil produced by the oil pump.
5.
Injecting grease with pressure
Inject grease at various sliding or rolling bearing sections, and see Fig. 2-10:
(1) Water pump of diesel engine and fan bearing.
(2) Bearing for transmission shaft joint fork.
(3) Bearing for control handle.
(4) All pin sleeve pairs at both ends of the oil cylinders.
(5) Hinge pin sleeve pairs of front and rear frames; swing pin sleeve pairs for sub-frame.
(6) Each pin set in working device.
