Operation Manual
16
1.5.8.3 Unless otherwise indicated, never make any adjustment when the machine is moving or the
engine is running.
1.5.8.4 The gap of link mechanism for controlling the equipment may change with the movement of
equipment or machine. Stay away from the area where the gap may change suddenly due to the
movement of machine or equipment.
1.5.8.5 Avoid all rotating and moving parts.
1.5.8.6 Some of the protective covers are required to be removed in the process of maintenance, and
reinstall them after the maintenance.
1.5.8.7 Make the objects away from the rotating fan blades which will cast the object or cut it.
1.5.8.8 Never use the twisted or worn steel rope, and wear gloves when touching the steel rope.
1.5.8.9 When knocking the positioning pin, it may fly out and hurt the people, so confirm no other
people nearby and wear the protective glasses to avoid the eye injury. When you strike the objects,
debris will fly out, so ensure that no one will be damaged by the flying debris.
1.5.9
Protection fromfire and explosion
1.5.9.1 All fuels, most of lubricating oils and some of coolant mixtures are flammable.
1.5.9.2 The flammable fluid leaking or splashing on hot surfaces or electrical parts may cause a fire,
resulting in personnel injury and property loss.
1.5.9.3 Clear the flammable materials attached on the surface of machine, and avoid any
inflammable accumulation.
1.5.9.4 Do not operate the machine near the open flame.
1.5.9.5 Do not perform the welding or the flame cutting on the pipe or tank containing the flammable
fluid before cleaning it thoroughly with the non-flammable solvent.
1.5.9.6 Check all the wires before starting the machine every day. Before operating the machine,
repair the loose or worn wires, clean and tighten all the connectors.
1.5.9.7 Check all the pipelines for aging or damage before starting the machine every day, and
replace the aging or damaged pipelines timely to prevent the fire due to the fluids leakage. Make sure
that the pipelines of machine are in good usable status.
1.5.9.8 Carefully add the fuel, lubricating oil or other fluids. Do not smoke or perform the adding near
the open flames or sparks. Be sure to shut down the engine before the adding and add the fuel tank
outdoor.
1.5.9.9 The gas comes out from the battery may explode. Make the open flames or sparks away from
the top of battery. Do not smoke at the charging site of battery.
1.5.9.10 Check the charging status with voltmeter or hydrometer not by bridging the metal object on
the terminals.
1.5.9.11 Incorrect jumper cable may cause an explosion, resulting in personnel injury. For specific
instructions, see the section of Use, Maintenance and Notes of Wheel Loader Battery in the manual.
