SFA-5000 • SFA-10000 EtherCAT
in the cap, use one TCEI M3 x 6 cylindrical head screw with two tooth
lock washers.
1.3 Mechanical safety
•
Install the device following strictly the information in the “3 - Mechanical
installation” section on page 19;
•
mechanical installation has to be carried out with stationary mechanical
parts;
•
do not disassemble the unit;
•
do not tool the unit;
•
delicate electronic equipment: handle with care; do not subject the device
to knocks or shocks;
•
respect the environmental characteristics of the product;
•
we suggest installing the unit providing protection means against waste,
especially swarf as turnings, chips, or filings; should this not be possible,
please make sure that adequate cleaning measures are in place in order to
prevent the wire from jamming;
•
to avoid failures, never exceed the maximum measuring length and
prevent the wire from tangling up;
•
never release the wire freely, always help the wire wind properly: risk of
personal injury and/or equipment damage;
•
always keep the wire aligned not to damage the equipment;
•
the stroke per turn of the draw-wire unit is 200 mm (7.874”).
MAN SFA_5000_10000_EC E 1.0.odt
1 - Safety summary
17 of 84