manualshive.com logo in svg

LG MASTER-K 120S Series, Руководство пользователя, Страница: 170 / 306

Поделиться
Скачать
LG MASTER-K 120S Series Скачать руководство пользователя страница 170

Chapter 7    Usage of Various Functions

 

7-86 

 

 
 

(B)

 Backlash Compensation Amount 

•

 The tolerance that the machine does not work by the wear when the rotation direction changes in case that a gear,   

screw etc is combined to run at the motor axle, is called as ‘Backlash”. 
Therefore, when you change the rotation direction, it is required to add the backlash compensation amount to the 
positioning amount for output. 

•

 The setting range is 0 

∼

  1,000(unit: Pulse) at each axis. 

•

 If the position moved 1m to the right and again 1m to the left, it is not possible to reach the original position by 

backlash. At this time, it is required to add backlash compensation amount

. 

 

 

 

 

                                                    

 

                                                    

 

                                                                              

                                                    

(C) 

Bias Speed 

     

•

 As the stepping motor has unstable torque near zero speed, the start speed shall be set in the beginning of operation 

in command to smooth the rotation of motor and reduce the positioning time. The speed to be set at this time is called 
“Bias Speed”.   

•

 The setting range is 5

∼

10,000(unit: 1pps) at each axis. 

•

 Bias speed shall be used for the main axis of 

①

  positioning operation by setting command,   

②

  origin return operation,   

③

 JOG operation. 

                                                                                                                                                     

 

  
 
 
 
 
 
 
 
 
 
 

(D)

 Speed Limit 

•

 max. Speed available to set for positioning operation. 

•

 The setting range is 5~100,000 (unit : 1pps). 

•

 The operation speed of positioning operation, origin return speed and Jog operation speed is influenced by speed 

limit and if they are set as higher value than speed limit, error will occur. 

 
 
 

Direction change

Backlash

Gear 

Backlash 

1m movement right side (normal) 

Transfer amount including Backlash compensation amount 

1m movement left side (reverse) 

Acceleration

time

 

Time

 

Positioning speed

 

Origin return speed

 

JOG Speed

 

Interpolation operation
speed

 

Speed

 

Bias speed

 

Bias speed 
setting action

 

Speed limit

   

Bias speed not-setting
action

 

Deceleration 

time

Содержание MASTER-K 120S Series



















































































































































































































































































































Отзывы:

Нет отзывов