In Windows 7 or earlier
a
Click
or click
Start
, and then click
Run
.
b
In the Start Search or Run dialog, type
control printers
.
c
Press
Enter
, or click
OK
.
2
Depending on your device, do either of the following:
•
Press and hold the printer you want to update.
•
Right
‑
click the printer you want to update.
3
From the menu that appears, do either of the following:
•
For Windows 7 or later, select
Printer properties
.
•
For earlier versions, select
Properties
.
4
Click the
Configuration
tab.
5
Do either of the following:
•
Click
Update Now
‑
Ask Printer
.
•
Under Configuration Options, manually add any installed hardware options.
6
Click
Apply
.
For Macintosh users
1
From the Apple menu, navigate to either of the following:
•
System Preferences
>
Print & Scan
> select your printer >
Options & Supplies
>
Driver
•
System Preferences
>
Print & Fax
> select your printer >
Options & Supplies
>
Driver
2
Add any installed hardware options, and then click
OK
.
Networking
Notes:
•
Purchase a MarkNet
TM
N8352 wireless network adapter first before setting up the printer on a wireless network.
For more information on installing the wireless network adapter, see the setup sheet that came with the
adapter.
•
A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi
Protected Access (WPA), and WPA2 are types of security used on a network.
Preparing to set up the printer on an Ethernet network
To configure your printer to connect to an Ethernet network, organize the following information before you begin:
Note:
If your network automatically assigns IP addresses to computers and printers, continue on to installing the
printer.
•
A valid, unique IP address for the printer to use on the network
•
The network gateway
Additional printer setup
37
