Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the
User’s
Guide
.
Note:
If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the
User’s Guide
or
visit
www.lexmark.com
.
Restore held jobs?
Try one or more of the following:
•
From the printer control panel, select
Restore
to restore all held jobs stored in the printer hard disk. For
non
‑
touch
‑
screen printer models, press
to confirm.
•
From the printer control panel, select
Do not restore
if you do not want any print jobs to be restored. For
non
‑
touch
‑
screen printer models, press
to confirm.
Scanner automatic feeder cover open
Close the ADF cover.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support person.
Scanner disabled. Contact system administrator if problem persists. [840.02]
From the printer control panel, try one or more of the following:
•
Select
Continue with scanner disabled
to return to the home screen, and then contact your system support person.
•
Select
Reboot and automatically enable scanner
to cancel the job.
Note:
This attempts to enable the scanner.
•
For non
‑
touch
‑
screen printer models, press
to confirm.
Scanner jam, remove all originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Scanner jam, remove jammed originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Troubleshooting
235
