Lenovo System x3750 M4 Скачать руководство пользователя страница 302

Страница: 302 / 982

There are two types of microprocessor installation tools. The tools are similar in function and design;
but, have a major difference.

Be sure to use the installation tool that comes with your microprocessor installation tool assembly.

• Installation Tool A has one setting for installing one size of microprocessor that supports E5-26xx and

E5-46xx microprocessors.

• Installation Tool B supports E5-26xx, E5-46xx, E5-26xx v2, and E5-46xx v2 microprocessors. Installation

Tool B has two settings for installing two different sizes of microprocessors. The settings on Tool B are:

– “L” for smaller low core microprocessors

– “H” for larger high core microprocessors

Microprocessor Installation Tools A and B are shown in the next illustration.

Installation tool

Microprocessor

Cover

Microprocessor

Installation tool

Microprocessor Installation Tool A

Microprocessor Installation Tool B

To install the microprocessor and heat sink, complete the following steps:

1. Read the safety information and installation guidelines, see “Safety” on page v and “Installation

guidelines” on page 38.

2. Install the microprocessor:

a. Open the packaging that contains the new microprocessor installation tool assembly and carefully

remove the installation tool assembly from the package.

Attention:

• The microprocessor FRU comes with two microprocessor tools: one tool is empty and one tool

comes with a microprocessor and a cover on the bottom of the tool.

• Do not touch the microprocessor socket contacts. Contaminants on the microprocessor contacts,

such as oil from your skin, can cause connection failures between the contacts and the socket.

• Handle the microprocessor carefully. Dropping the microprocessor during installation or removal

can damage the contacts.

• Do not use excessive force when you press the microprocessor into the socket.

b. Release the sides of the microprocessor protective cover on the bottom of the microprocessor and

carefully remove the cover from the installation tool.

288

Lenovo System x3750 M4 Installation and Service Guide

Содержание System x3750 M4























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3750 M4

Отзывы:

Похожие инструкции для System x3750 M4

Бренды по названию

Популярные бренды

Lenovo System x3750 M4, Инструкция по установке и обслуживанию

Результаты поиска

Содержание System x3750 M4

Отзывы:

Похожие инструкции для System x3750 M4

Бренды по названию

Популярные бренды