Lenovo System x3750 M4, Инструкция по установке и обслуживанию

Страница: 155 / 982

The system-event log contains POST and system management interrupt (SMI) events and all events that
are generated by the baseboard management controller that is embedded in the IMM2.
Note: If the system-error LED on the front of the server is lit, review the system-event log to determine
what the fault is or look at the IMM2 interface to determine if there are any active events. Once the
fault is resolved, the system-error LED will turn off.
The following list contains the activities you can perform in the System Event Logs main menu item:
– POST Event Viewer
Select this choice to enter the POST event viewer to view the error messages in the POST event log.
– System Event Log
Select this choice to view the system-event log.
– Clear System Event Log
Select this choice to clear the system-event log.
• User Security
Select this choice to set, change, or clear passwords. The full Setup utility menu, enables all of the
options in the User Security option. See “Passwords” on page 141 for more information.
This choice is on the full and limited Setup utility menu.
– Set Power-on Password
Select this choice to set or change a power-on password. See “Power-on password” on page 142
for more information.
– Clear Power-on Password
Select this choice to clear the power-on password.
– Set Administrator Password
Select this choice to set or change an administrator password. An administrator password is intended
to be used by a system administrator; it limits access to the full Setup utility menu. If an administrator
password is set, the full Setup utility menu is available only if you type the administrator password at
the password prompt. For more information, see “Administrator password” on page 143.
– Clear Admin Password
Select this choice to clear the Administrator Password.
• Save Settings
Select this choice to save the changes that you have made in the settings. This choice is on the full
Setup utility menu only.
• Restore Settings
Select this choice to cancel the changes that you have made in the settings and restore the previous
settings. This choice is on the full Setup utility menu only.
• Load Default Settings
Select this choice to cancel the changes that you have made in the settings and restore the factory
settings. This choice is on the full Setup utility menu only.
• Exit Setup
Select this choice to exit from the Setup utility. If you have not saved the changes that you have made in
the settings, you are asked whether you want to save the changes or exit without saving them.
Passwords
Use the information in this section to understand the purpose and use of passwords.
Chapter 3
.
Configuration information and instructions
141