Lenovo System x3750 M4, Инструкция по установке и обслуживанию

Страница: 163 / 982

Note: You can use the -x path command-line interface option to extract the files. For more
information about this option, see the readme file that comes with the update package.
Step 3. (Windows 2003) Install the
ibm_rndis_server_os.inf
file by right-clicking the file and clicking Install .
This generates a PNF file of the same name in
\WINDOWS\inf
.
(Windows 2008) Click Computer Management
➙
Device Manager and find the RNDIS Device.
Click Properties ➙ Driver ➙ Reinstall driver . Point the server to the
\Windows\inf
directory where
it can find the
ibm_rndis_server_os.inf
file and install the device.
Step 4. Click Computer Management
➙
Device Manager . Right-click Network adapters and select
Scan for hardware changes . A small pop-up confirms that the Ethernet device is found and
installed. The New Hardware Wizard starts automatically.
Step 5. When you are prompted
Can Windows connect to Windows Update to search for software?
, select No,
not this time . Click Next to continue.
Step 6. When you are prompted
What do you want the wizard to do?
, select Install from a list or specific
location (Advanced) . Click Next to continue.
Step 7. When you are prompted
Please choose your search and installation options
, select Don't search. I
will choose the driver to install . Click Next to continue.
Step 8. When you are prompted
Select a hardware type, and then click Next
, select Network adapters .
Click Next to continue.
Step 9. When you are prompted with the statement
Completing the Found New Hardware Wizard
, click
Finish . A new local area connection appears. If the message
This connection has limited or no
connectivity
is displayed, ignore this message.
Step 10. Return to the Device Manager. IBM USB Remote NDIS Network Device or Lenovo USB Remote
NDIS Network Device appears under Network Adapters .
Step 11. Use the Setup utility to view or set the IP address.
a. Connect a keyboard, monitor, and mouse to the server.
b. Turn on the server. (see “Turning on the server” on page 23).
c. When the prompt
Press <F1> Setup
is displayed, press F1. If you have set an administrator
password, you must type the administrator password to access the full Setup utility menu. If
you do not type the administrator password, a limited Setup utility menu is available.
d. Select System Settings
→
Integrated Management Module
→
Network Configuration .
e. Locate the IP address.
f. Exit from the Setup utility.
Installing the LAN over USB Linux device driver
Versions of Linux since RHEL5 Update 3 and SLES10 Service Pack 2 support the LAN over USB interface by
default. This interface is detected and displayed during the installation of these operating systems.
Note: Older Linux distributions might not detect the LAN over USB interface, and might require manual
configuration. For information about configuring LAN over USB on specific Linux distributions, see
http://www.ibm.com/support/entry/ portal/docdisplay?lndocid=MIGR-5083207.
The IMM2 LAN over USB interface requires that the
usbnet
and
cdc_ether
device drivers be loaded. If the
drivers have not been installed, use modprobe to install them. When these drivers are installed, the IMM2
USB network interface is shown as a network device in the operating system. To discover the name that the
operating system has assigned to the IMM2 USB network interface, type:
dmesg | grep -i cdc ether
Chapter 3
.
Configuration information and instructions
149