Lenovo System x3750 M4, Инструкция по установке и обслуживанию

Страница: 168 / 982

Remotely over a LAN
If you omit any optional parameter, the default value is used.
Note: If you omit any optional parameter, the default value is used.
To update the UUID in the ASU command-line interface, enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoUUID
uuid
–host
ipaddress
[–user
userid
][–password
password
]
where:
uuid
is the user-assigned hexadecimal value, up to 16 bytes, that identifies the server.
ipaddress
is the external LAN IP address of the IMM.
userid
is the IMM account name (1 of 12 accounts). The default is USERID.
password
is the IMM account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not the letter O).
To update the DMI/SMBIOS data, complete the following steps:
Step 1. In the ASU command-line interface, enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoProdName
xxxxyyy
–host
ipaddress
[–user
userid
][–password
password
]
where:
xxxx
is the 4-digit machine type of the server.
yyy
is the 3-digit model number of the server.
ipaddress
is the external LAN IP address of the IMM.
userid
is the IMM account name (1 of 12 accounts). The default is USERID.
password
is the IMM account password (1 or 12 accounts). The default is PASSW0RD (with a zero,
not the letter O).
Step 2. Enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoSerialNum
zzzzzzz
–host
ipaddress
[–user
userid
][–password
password
]
where zzzzzzz is the 7-character serial number of the server.
Step 3. Enter the following command:
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
–host
ipaddress
[–user
userid
][–password
password
]
154
Lenovo System x3750 M4 Installation and Service Guide